NETGEAR WGR826V User Manual page 30

Hide thumbs Also See for WGR826V:

Table of Contents

He browses SASVP sever on any Internet browser from his PC connected back on TA and using TA as

router. When he activates his account, TA receives an authentication key, which will be used in

subsequent communications with SASVP server. The authentication key in stored in securely, so that

successive reboots of TA doesn't erase authentication key.

For testing purposes, one can activate an account for testing by going to the following link from any web

browser. This can be done even when TA is not connected in the path for Internet.

https://12.0.37.209/att/auth/auth.pl?ip=66.80.10.151&tn=7323684360

Replace ip = xxx.yyy.zzz.aaa with whatever address TA will communicate with SASVP. This would be the

address of WAN interface of TA.

Replace tn = xyzabcpqrs with what ever telephone number assigned for you for testing. This would be

assigned by Voice service providers.

Trouble shooting and Log:

You can view and enable trouble shooting on TA , if you want to see what is going on between TA and

provisioning server. For this you need access to TA console.

Connect a serial cable to console port of TA ( baud rate 115200).

Press "return" key on the keyboard. You should get linux bash prompt (#)

Enter cli from the bash prompt. You will get WGR826V's CLI prompt.

#cli

**************************************************************

Welcome To The iGateway Command Line Interface

**************************************************************

VoIP initialized sip@8882 cp@8884 on 127.0.0.1

To change the current settings you may run /config/voip/deinit && /config/voip/

init...

iGateway:/>

Enter the following commands from iGateway CLI prompt.

iGateway:/>traceenable PRVD

TRACING FOR PRVD IS ENABLED AS 1

iGateway:/>tracestart

TRACING HAS BEEN STARTED BEFOREHAND

iGateway:/>traceset all

GLOBAL TRACE LEVEL IS ALL WITH LEVEL NUMBER 1

iGateway:/>

"Traceenable" command enables tracing for PRVD daemon . This daemon communicates with

Provisioning server time to time for configuration and image updates.

Page 30 of 36

Table of Contents