Revision 0 10640I00.Slk - Honeywell KHF 1050 System Installation Manual

Hf communication system
Hide thumbs Also See for KHF 1050:
Table of Contents

Advertisement

Preliminary - Subject to Change Without Notice
Frequency Band
(MHz)
10.0
11.1
13.3
17.9
21.9
NOTE:
HF propagation is dependent on the condition of the
ionisphere. Occasionally, distances significantly
different than those indicated above may be realized.
*
At at times, communication may not be possible on this band
during this time.
8. Removal and Re-installation
CAUTION: Remove all power before performing removal and
8.A. KAC 1052 Antenna Coupler Removal and Re-installation
8.A.(1) KAC 1052 Antenna Coupler Removal
8.A.(1)(a) Detach cables from connector J10521.
8.A.(1)(b) Remove nut and washer on the GND post. Detach ground
8.A.(1)(c) Loosen retaining screw clamp loacted at the front of
8.A.(2) KAC 1052 Antenna Coupler Re-installation
8.A.(2)(a) Slide the KAC 1052 Power Amplifier gently into the
8.A.(2)(b) Engage and tighten retaining screw clamps to secure
Revision 0
10640I00.SLK
KHF 1050 SYSTEM INSTALLATION MANUAL
Daytime Distance
(miles)
300 to 1000
400 to 1200
600 to 1500 or greater
700 to 1800 or greater* often unusable
900 to 1800 or greater* often unusable
Typical HF Signal Propagation Distance
for Common Aviation Bands
re-installation procedures.
strap. Replace nut and washer on the GND post.
the KAC 1052 Antenna Coupler. Remove unit from rack.
mounting rack.
unit.
N
500 to 1800 or greater*
600 to 1800 or greater*
often unusable
Table 2011
23-10-09
Nighttime Distance
(miles)
Page 2043
Mar/2003

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents