Revision 0 10640I00.Slk - Honeywell KHF 1050 System Installation Manual

Preliminary - Subject to Change Without Notice
AIRCRAFT EQUIPMENT
AN-18
AN-16
AN-14
AN-12
High Voltage HN Cables:
155-02988-2215
155-02989-0001
155-02988-0121
Revision 0
10640I00.SLK
N
KHF 1050 SYSTEM INSTALLATION MANUAL
Equipment Required But Not Supplied
1,909 Nominal Circular Mil Area*
0.115 inches Max. Overall Diameter
6.44 ohms Max. per 1000 feet @ 20°C
16 amps Max. Cont. Current Rating**
10 amps Max. Cont. Current Rating***
2,409 Nominal Circular Mil Area
0.130 inches Max. Overall Diameter
4.76 ohms Max. per 1000 feet @ 20°C
22 amps Max. Cont. Current Rating**
13 amps Max. Cont. Current Rating***
3,830 Nominal Circular Mil Area
0.150 inches Max. Overall Diameter
2.99 ohms Max. per 1000 feet @ 20°C
32 amps Max. Cont. Current Rating**
17 amps Max. Cont. Current Rating***
6,088 Nominal Circular Mil Area
0.170 inches Max. Overall Diameter
1.88 ohms Max. per 1000 feet @ 20°C
41 amps Max. Cont. Current Rating**
23 amps Max. Cont. Current Rating***
Designed for single 1050 installation.
Length is 15" 38.1 cm). Both connectors
are straight.
Designed for dual 1050 installation.
Total length is 16" (40.64 cm). Common
leg is 6" (15.24 cm). Each separate leg
is 10" (25.4 cm). All three connectors
are straight.
Designed for single 1050 installaton.
21" (53.34 cm) length center, both
connectors right angle, 180 degree
indexing (one connector up, one down).
DESCRIPTION
23-10-09
Page 15
Mar/2003