Sample Application Using A Sample Loop - GE AKTApure User Manual

5 Operation
5.7 Sample application

5.7.3 Sample application using a sample loop

5.7.3 Sample application using a sample loop
Introduction
A sample loop is recommended for injection of smaller sample volumes onto the column.
A sample loop can be connected to either the Injection valve or the Loop valve. When using the Loop
valve, up to five loops can be connected simultaneously.
Note:
How to fill a sample loop
Follow the instructions below to fill the sample loop with sample.
Step
1
2
3
190
Sample loop is called capillary loop in UNICORN.
Action
Connect a suitable sample loop to Injection valve ports LoopF (fill) and LoopE (empty).
Fill a syringe with sample.
Connect the syringe to the Injection valve port Syr.
ÄKTA pure User Manual 29119969 AB