Placing The Sample - GE ImageQuant LAS 4000 Original Instructions Manual

6 Turn the filter changer so the desired position is easily accessible. If a filter is already in place at
this position, unscrew it carefully and put it back in its cover.
7 Screw the new filter into place.
8 Select the appropriate filter from the drop-down list and click the OK button.
Note:

4.2.3 Placing the sample

This section describes how to choose an appropriate sample tray, and how to place the sample for
exposure.
1 Select a sample tray suitable for the type of exposure to be performed.
Detection
Chemiluminescence
Bioluminescence
Fluorescence
Getting Started with ImageQuant LAS 4000 28-9607-59 AB
The filter changer returns to the original position when you click the Start, Focusing or
Method/Tray position buttons.
Sample type
Membrane
Titer plate
Gel (UV Trans illumination)
Gel (Epi illumination)
Membrane
4.2.2 Preparing the ImageQuant LAS 4000 for exposure
Tray
Epi tray
NP tray
UV trans tray
Epi tray
Epi tray
4 Operation
4.2 Preparation
49