Table of Contents
Advertisement
16
www.aeg.com
8.3 Heat + Hold
Conditions for the function:
• The set temperature is more than 80
°C.
• The function: Duration is set.
The function: Heat + Hold keeps
prepared food warm at 80 °C for 30
minutes. It activates after the baking or
roasting procedure ends.
You can activate or deactivate the
function in the menu: Basic Settings.
1. Activate the appliance.
2. Select the heating function.
3. Set the temperature above 80 °C.
4. Press
display shows: Heat + Hold.
5. Press
When the function ends, an acoustic
signal sounds.
The function stays on if you change the
heating functions.
9. AUTOMATIC PROGRAMMES
WARNING!
Refer to Safety chapters.
9.1 Assisted Cooking with
Recipe Automatic
This appliance has a set of recipes you
can use. The recipes are fixed and you
cannot change them.
1. Activate the appliance.
2. Select the Assisted Cooking menu.
Press
3. Select the category and dish. Press
4. Select a recipe. Press
When you use the Manual
function, the appliance uses
the automatic settings. You
can change them as with
other functions.
again and again until the
to confirm.
to confirm.
to confirm.
8.4 Extra Time
The function: Extra Time makes the
heating function continue after the end
of Duration.
1. When the cooking time ends, an
acoustic signal sounds. Press a
sensor field.
The display shows the message.
2. Press
cancel.
3. Set the length of the function.
4. Press
9.2 Assisted Cooking with
Weight Automatic
This function automatically calculates the
roasting time. To use it, it is necessary to
input the food weight.
1. Activate the appliance.
2. Select the menu: Assisted Cooking.
Press
3. Select the category and dish. Press
4. Select the function: Weight
Automatic. Press
5. Use the shuttle to set the food
weight. Press
to confirm.
The automatic programme starts.
6. You can change the weight at any
time. Use the shuttle to change the
weight.
7. When the time ends, an acoustic
signal sounds. Press a sensor field to
deactivate the signal.
Applicable to all heating
functions with Duration or
Weight Automatic. Not
applicable to heating
functions with the core
temperature sensor.
to activate or
.
to confirm.
to confirm.
to confirm.
to confirm.
to
Advertisement
Table of Contents
