Snmp-Server Filter - Cisco Small Business 300 1.1 Series Administration Manual

Network Management Protocol (SNMP) Commands
78-20269-01 Command Line Interface Reference Guide
y
The SNMPv3 database will be erased. Do you wish to continue? [Y/N]
y
console(config)# snmp-server user tom acbd v3
10.6

snmp-server filter

The snmp-server filter Global Configuration mode command creates or updates a
Simple Network Management Protocol (SNMP) server filter entry. Use the no form
of this command to remove the specified SNMP server filter entry.
Syntax
filter-name oid-tree {included | excluded}
snmp-server filter
no snmp-server filter
Parameters
•
filter-name—Specifies the label for the filter record that is being updated or
created. The name is used to reference the record. (Length: 1–30
characters)
•
oid-tree—Specifies the ASN.1 subtree object identifier to be included or
excluded from the view. To identify the subtree, specify a text string
consisting of numbers, such as 1.3.6.2.4, or a word, such as System. Replace
a single sub-identifier with the asterisk (*) wildcard to specify a subtree
family; for example, 1.3.*.4.
•
included—Specifies that the filter type is included.
•
excluded—Specifies that the filter type is excluded.
Default Configuration
No view entry exists.
Command Mode
Global Configuration mode
filter-name [ oid-tree ]
10
153