Terminal Datadump - Cisco Small Business 300 1.1 Series Administration Manual

User Interface Commands
78-20269-01 Command Line Interface Reference Guide
Parameters
number-of-commands—Specifies the number of commands the system maintains
in its history buffer. (Range: 10–207)
Default Configuration
The default configuration for all terminal sessions is defined by the
Line Configuration mode command.
Command Mode
EXEC mode
User Guidelines
The terminal history size EXEC command changes the command history buffer
size for the current terminal session. Use the
command to change the default history buffer size.
The maximum number of commands in all buffers is 207.
Example
The following example sets the command history buffer size to 20 commands for
the current terminal session.
Console> terminal history size
2.13

terminal datadump

The terminal datadump EXEC mode command enables dumping all the output of a
show command without prompting. Use the no form of this command to disable
dumping.
Syntax
terminal datadump
no terminal datadump
Parameters
N/A
history Line Configuration mode
20
2
history size
42