Show Default-Vlan-Membership - Cisco Small Business 300 1.1 Series Administration Manual

Virtual Local Area Network (VLAN) Commands
78-20269-01 Command Line Interface Reference Guide
User Guidelines
This command becomes effective after reboot of the device.
Example
The following example defines the default VLAN as 2.
Console(config)# vlan database
Console(config-vlan)#
New Default VLAN ID will be active after save configuration and reboot device.
30.5

show default-vlan-membership

Use the show default-vlan-membership privileged EXEC command to view the
default VLAN membership.
Syntax
show default-vlan-membership [
Parameters
interface-id—Specify an interface ID. The interface ID can be one of the following
types: Ethernet port or Port-channel
Default Configuration
Membership in the default VLAN is displayed for all interfaces.
Command Mode
Privileged EXEC
Example
Console # show default-vlan-membership
Port Forbidden Membership
---- ------ -------
gi
1 TRUE FALSE
gi
2 FALSE TRUE
gi
3 FALSE FALSE
2
default-vlan vlan
interface-id
]
30
407