Wrr-Queue Cos-Map - Cisco Small Business 300 1.1 Series Administration Manual

Quality of Service (QoS) Commands
78-20269-01 Command Line Interface Reference Guide
Command Mode
Policy-map Class Configuration mode
User Guidelines
An aggregate policer can be applied to multiple classes in the same policy map.
An aggregate policer cannot be applied across multiple policy maps or interfaces.
Use the exit command to return to the Policy-map Configuration mode. Use the
end command to return to the Privileged EXEC mode.
Example
The following example applies the aggregate policer called Policer1 to a class
called class1 in a policy map called policy1 and class2 in policy map policy2.
Console(config)# qos aggregate-policer
drop
Console(config)#
policy-map
Console(config-pmap)#
Console(config-pmap-c)#
Console(config-pmap-c)#
Console(config-pmap)#
Console(config)# policy-map
Console(config-pmap)#
Console(config-pmap-c)#

41.17 wrr-queue cos-map

Use the wrr-queue cos-map Global Configuration mode command to map Class of
Service (CoS) values to a specific egress queue. Use the no form of this command
to restore the default configuration.
Syntax
queue-id cos0
wrr-queue cos-map
no wrr-queue cos-map [
policer1 124000 9600
policy1
class class1
policer1
police aggregate
exit
exit
policy2
class2
class
police aggregate policer1
cos7
...
queue-id
]
41
exceed-action
574