Canon i-SENSYS LBP151dw User Manual page 39

When Legal size paper is loaded
The paper guide at the rear edge of the paper will be extended. Open the dust cover extension, then lower
the dust cover.
Make sure that no paper is loaded in the multi-purpose tray before printing from the drawer. If paper is loaded
in both the drawer and multi-purpose tray, paper in the multi-purpose tray is to be fed.
● When performing printing, open the paper stopper in advance so that the output paper does not fall out of
the output tray.
● After reloading paper that has run out during printing, or resetting the paper after a paper error
notification, press the
Printing on the Back Side of Printed Paper (Manual 2-Sided Printing)
You can print on the back side of printed paper. Flatten any curls on the printed paper and insert it into the
drawer with the side to print face up (previously printed side face down).
● Load only one sheet of paper each time you print.
● You can use only paper printed with this machine.
● You cannot print on the side that has been previously printed.
LINKS
Paper(P. 290)
Basic Operations
(Paper) key to restart printing.
34