Canon i-SENSYS LBP151dw User Manual page 108

Check to use stateless addresses. Clear the check box if you do not want to use stateless addresses.
[Use Manual Address]
When you want to enter an IPv6 address manually, select the check box and enter values in the [IP Address],
[Prefix Length], and [Default Router Address] text boxes. Clear the check box if you do not want to enter a
manual address.
[IP Address]
Enter an IPv6 address. Addresses that start with "ff" (multicast addresses) and the loopback address (::1)
cannot be entered.
[Prefix Length]
Enter the length (number of bits) of the network portion of the address.
[Default Router Address]
Specify the default router address, as necessary. Addresses that start with "ff" (multicast addresses) and the
loopback address (::1) cannot be entered.
[Use DHCPv6]
Select the check box to use the stateful address. Clear the check box if you do not want to use the stateful
address.
6
Click [OK].
Checking whether the settings are correct
Make sure that the Remote UI screen can be displayed with your computer by using the IPv6 address of the
machine. Starting the Remote UI(P. 175)
If you change IP addresses after installing the printer driver
You need to add a new port.
LINKS
Setting IPv4 Address(P. 98)
Viewing Network Settings(P. 104)
Network
Configuring Printer Ports(P. 110)
103