Specifying IP Addresses for Firewall Rules
You can allow only communication with devices that have the specified IP addresses and reject communication with
other devices. You can specify a single IP address or a range of IP addresses.
●
Up to 4 IP addresses (or ranges of IP addresses) can be specified for both IPv4 and IPv6.
●
The communication protocols that can be restricted in this way are TCP, UDP, and ICMP.
1
Start the Remote UI and log on in System Manager Mode.
UI(P. 175)
2
Click [Settings/Registration].
3
Click [Security Settings]
4
Click [Edit] to specify a filter type.
Security
[IP Address Filter].
141
0YFA-031
Starting the Remote