Starting The Remote Ui - Canon i-SENSYS LBP151dw User Manual

Starting the Remote UI

To operate the machine remotely, start the Remote UI by entering the machine's IP address in your Web browser.
Before starting, check the IP address that has been assigned to the machine (
If you do not know the machine's IP address, ask your network administrator, or start the Remote UI from the Printer
Status Window ( Starting from the Printer Status Window(P. 176) ).
1
Start the Web browser.
2
Enter "http://<IP address of the machine>/" in the address field, and press the
[ENTER] key.
● If you are using an IPv6 address, enclose the IPv6 address with brackets (example: "http://
[fe80:2e9e:fcff:fe4e:dbce]/").
If a host name for the machine is registered with a DNS server
Instead of <IP address of the machine>, you can enter <"host name"."domain name"> (example: "http://
my_printer.example.com").
If a security alert is displayed
A security alert may be displayed when communication with the Remote UI is encrypted (
Encrypted Communication for the Remote UI(P. 151) ). If there are no problems with certificate settings or
TLS settings, continue browsing to the Remote UI site.
3
Select [System Manager Mode] or [General User Mode].
[System Manager Mode]
You can perform all Remote UI operations and make all settings. If a PIN (system manager password) has
been set, enter it in [System Manager PIN]. (
not been set (factory default setting), you do not need to input anything.
[General User Mode]
You can check the status of documents or the machine, and you can also check the settings.
4
Click [Log In].
Using the Remote UI
Setting System Manager Passwords(P. 138) ) If a PIN has
175
Viewing Network Settings(P. 104) ).
Enabling TLS
0YFA-03H