New And Changed Information - Cisco MDS 9000 Series Configuration Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

New and Changed Information

As of Cisco MDS NX-OS Release 4.2(1), software configuration information is available in new
feature-specific configuration guides for the following information:
System management
•
Interfaces
•
Fabric
•
Quality of service
•
Security
•
• IP services
• High availability and redundancy
The information in these new guides previously existed in the Cisco MDS 9000 Family CLI
Configuration Guide and in the Cisco MDS 9000 Family Fabric Manager Configuration Guide. Those
configuration guides remain available on Cisco.com and should be used for all software releases prior
to MDS NX-OS Release 4.2(1). Each guide addresses the features introduced in or available in a
particular release. Select and view the configuration guide that pertains to the software installed in your
switch.
For a complete list of document titles, see the list of Related Documentation in the "Preface."
To find additional information about Cisco MDS NX-OS Release 4.2(x), see the Cisco MDS 9000 Family
Release Notes available at the following Cisco Systems website:
http://www.cisco.com/en/US/products/ps5989/prod_release_notes_list.htm
About this Guide
The information in the new Cisco MDS 9000 NX-OS Interfaces Configuration Guide previously existed
in Part 3: Switch Configuration of the Cisco MDS 9000 Family CLI Configuration Guide.
Table 1
OL-19445-02, Cisco MDS NX-OS Release 4.2(x)
lists the New and Changed features for this guide, starting with MDS NX-OS Release 4.2(1).
Cisco MDS 9000 Family NX-OS Interfaces Configuration Guide
ix