Default Settings - Cisco MDS 9000 Series Configuration Manual

Default Settings

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
switch# config t
switch(config)# interface fc 4/7 - 10
Configure the port speed, rate mode, and port mode on the interfaces.
Step 8
switch(config-if)# switchport speed 1000
switch(config-if)# switchport rate-mode shared
switch(config-if)# switchport mode f
Enable the interfaces and return to configuration mode.
Step 9
switch(config-if)# no shutdown
switch(config-if)# exit
switch#
Default Settings
Table 3-10
Table 3-10
Parameter
Speed mode
Rate mode
Port mode
BB_credit
buffers
Performance
buffers
1. The 4-port 10-Gbps switching module only supports 10-Gbps traffic.
2. Auto port mode on the 12-port 4-Gbps switching module interfaces can operate in E port mode, TE port mode, and Fx port
3. Auto port mode on the 4-port 10-Gbps switching module interfaces can operate in E port mode, TE port mode, and F port
4. Performance buffers are shared among all ports on the module.
Table 3-11
Table 3-11
Parameter
Speed mode
Rate mode
Cisco MDS 9000 Family NX-OS Interfaces Configuration Guide
3-40
lists the default settings for Generation 2 interface parameters.
Default Generation 2 Interface Parameters
Default
48-Port 4-Gbps
Switching Module
auto
shared
Fx
16
–
mode.
mode.
lists the default settings for Generation 3 interface parameters.
Default Generation 3 Interface Parameters
Default
48-Port 8-Gbps
Switching Module
auto
shared
Chapter 3
24-Port 4-Gbps 12-Port 4-Gbps
Switching Module Switching Module
1
auto auto
shared dedicated
2
Fx auto
16 250
4
– 145
24-Port 8-Gbps
Switching Module
1
auto
shared
OL-19445-02, Cisco MDS NX-OS Release 4.2(x)
Configuring Fibre Channel Interfaces
4-Port 10-Gbps
Switching Module
1 1
auto
dedicated
3
auto
250
5
145
4/44-Port 8-Gbps
Host-Optimized Switching
Module
1
auto_max_4G
shared