Change Audio Sensitivity - NETGEAR Arlo Go User Manual

6. Under If the following, tap or click Edit
The Motion detection settings page displays.
7. Move the slider to adjust the sensitivity level for motion detection for this
camera.
If you used a mobile device to specify the settings, your settings are saved.
8. If you used a browser to specify the settings, click Save.
Your settings are saved.

Change Audio Sensitivity

¾ To change audio sensitivity for a camera:
1. Tap the Arlo icon
You can also enter
The Devices page displays.
2. Tap or click Mode.
A list of cameras displays.
3. Tap or click the Arlo Go camera.
A list of modes displays.
4. Tap or click Edit
The Edit Rule page displays.
5. Tap or click Edit
6. Under If the following, tap or click Edit
7. Move the slider to the desired level of audio detection.
If you used a mobile device to specify the settings, your settings are saved.
Modes, Rules, and Smart Alerts
on your mobile device.
arlo.netgear.com in the address bar of a browser.
next to Armed.
next to the rule.
37
next to Motion is detected.
next to Audio is detected.