NETGEAR Arlo Go User Manual page 11

5. If you are setting up a new Arlo account, tap or click New System Setup.
6. Select Arlo Go.
The Arlo Go Setup page displays.
7. Tap or click Continue to confirm that the SIM card that came in your Arlo Go
camera is activated.
The APN Information page displays.
8. Unless you received specific instructions from your service provider about your
APN, tap or click Skip this Step.
If your service provider instructed you to edit your APN, do the following:
a. Tap or click the Edit (pencil) icon.
The Edit APN page displays.
b. Enter the information from your service provider..
c. Tap or click Continue.
The How to Sync page displays.
9. Press the Sync button on the camera
10. Tap or click Continue.
The Scan QR Code (1 of 2) page displays.
11. Hold the QR code that the app displays 4 to 8 inches (10 to 20 cm) in front of
the camera until you hear a chime sound.
12. If you heard a chime sound, tap or click Yes, I heard a chime.
If you did not hear a chime sound, do the following:
a. Tap or click Back to try again.
b. Move the camera closer to or farther away from the QR code.
c. Press the Sync button.
d. Tap or click Continue.
e. When you hear a chime sound, tap or click Yes, I heard a chime.
13. Wait for the app to discover the Arlo Go camera.
The Claim Your Device page displays.
Set Up Your System
11