Download Print this page

NETGEAR Arlo Go Quick Start Manual

Hide thumbs Also See for Arlo Go:

Download this manual

Arlo Go Quick Start Guide

Table of Contents

Page 1 Arlo Go Quick Start Guide...
Page 2: What's Included
Sync button Rechargeable Power adapter battery connector Mount Arlo Go camera with SIM card Power adapter Note: SIM card is installed and Mount screws activated by Verizon Wireless Get the Arlo App For the best experience, download the Arlo app for your smartphone by scanning this QR code.
Page 3: Insert The Battery
Insert the Battery If power is available, you can plug your camera in and use it in powered mode.Best practice is to insert the battery into your Arlo Go camera even if you plan to power the camera using the power adapter.
Page 4: Place Your Camera
Set Up Your Arlo Go Camera Use the Arlo app and your Arlo account to set up your Arlo Go camera. If you already set up an Arlo account, you can add the Arlo Go camera to your account. During setup, your Arlo Go camera must be connected to a network.
Page 5 Internet connection. Additional restrictions and data charges might apply. Coverage and service are not available everywhere. During setup, the Arlo app uses the mobile network to find your Arlo Go camera so that you can add the camera to your Arlo account.
Page 6: Camera Led Guide
©NETGEAR, Inc., NETGEAR, the NETGEAR Logo, and Arlo are trademarks of NETGEAR, Inc. Compliance For the current EU Declaration of Conformity, visit http://kb.netgear.com/app/answers/detail/a_id/11621/ For regulatory compliance information, visit http://www.netgear.com/about/regulatory/.