Honeywell GNS-XLS Operator's Manual page 350

11. Press the BACK or * Key for selection (an asterisk is displayed if
selected) if release needs to be amended. Press BACK or * to
deselect.
12. ENTER Key - DEPRESS. The cursor will move to AIRPORT
ANALYSIS.
13. If the ENTER Key is pressed with the cursor over AIRPORT
ANALYSIS the AIRPORT ANALYSIS Page will be displayed.
See Figure 8-21.
14 Two free lines of text will only be available if the AMEND
RELEASE field has been selected.
15. Line Select
DEPRESS to position the
cursor in the first line of free
text. See Figure 8-19
16. INSERT up to 20 charac-
ters of text or leave the field
blank.
17. ENTER Key - DEPRESS. If
the field is blank, the cursor
will move to TRANSMIT. If
there is text in the first line,
the cursor will move to the
second line of free text.
See Figure 8-20.
18. INSERT up to 20 charac-
ters of text or leave the field
blank.
19. ENTER Key - DEPRESS.
The cursor will move to
TRANSMIT.
20. ENTER Key - DEPRESS to
transmit dispatch data via
the data link. The AFIS
MENU Page will then be
displayed.
NOTE: If a DATA LINK DISABLED message appears, the data link
is not available. Wait for TRANSMIT to appear or notify maintenance
of the problem.
8-20
Key -
GNS-X FMS with Regional Airline AFIS
LS
20:14 DISPATCH MENU
<
NEED RELEASE
NEED FLIGHT PLAN
<
MANUAL RELEASE
*AMEND RELEASE
<
AIRPORT ANALYSIS
<
FIRST LINE OF TEXT
<
TRANSMIT
Figure 8-19
20:14 DISPATCH MENU
<
NEED RELEASE
NEED FLIGHT PLAN
<
MANUAL RELEASE
*AMEND RELEASE
<
AIRPORT ANALYSIS
<
FIRST LINE OF TEXT
SECOND LINE OF TEXT
<
TRANSMIT
Figure 8-20
>
>
>
>
>
>
>
>
>
>
Rev 4
Sep/97