Honeywell GNS-XLS Operator's Manual page 301

8. ENTER Key - DEPRESS.
9. FR - INSERT sender's iden-
tification (name or tail num-
ber).
10. ENTER Key - DEPRESS.
11. # - INSERT receiver's
address. See
possible addresses.
12. ENTER Key - DEPRESS.
13. Message - INSERT text
message using the ENTER
Key to access each succes-
sive line. (Figure 7-70)
NOTE: The cursor remains
fixed and the page display
moves up or down one line at a
time through the cursor. Fifteen
lines of text can be entered.
(Figure 7-71)
The following guidelines are
used for entering and editing
text:
a. Entering a character
causes the character at
the cursor position and
all the characters to the
right to be shifted one
position.
b. The BACK Key may be used to delete characters one at a
time from right to left.
c. The SP Key may be used as a spacer to separate words.
d. The PRV Key may be used to move the cursor one space to
the left.
e. The NXT Key may be used to move the cursor one space to
the right.
Rev. 3
GNS-X
Sep/96
Table 1 for
Flight Management System AFIS Operation
LS
SEND AFIS MSG
$
MESSAGE
TO: DISPATCH
%
FR: N2175C
#: SNABCDE
DELAYED DUE TO WX
NEW ETA IS 1430Z
<
SEND MESSAGE?
Figure 7-70
SEND AFIS MSG
$
DELAYED DUE TO WX
%
NEW ETA IS 1430Z
PLS ARR GND TRANS
ALSO PLS HAV MECH
AVAIL TO DISCUSS POS
MAINT PROB
<
SEND MESSAGE?
Figure 7-71
>
PPM
>
>
>
7-39