NETGEAR DM111P User Manual page 26

Broadband ADSL2+ Modem User Manual
This screen shows the following settings:
Table 2-1. Menu 3.2 - Modem Status Fields
Field
System Up Time
Account Name
Firmware Version
Bootloader Version
ADSL Driver Version
ADSL Port
MAC Address
IP Address
Network Type
IP Subnet Mask
Gateway IP Address
Primary DNS Server
Secondary DNS Server
LAN Port
MAC Address
IP Address
DHCP
IP Subnet Mask
2-6
Description
The time that the modem has been connected to the Internet in the
format days:hours:minutes:seconds.
The Account Name assigned to the modem during setup.
The modem firmware version. This value will change if you upgrade
your modem.
The modem bootloader version. This value will change if you upgrade
your modem.
The modem driver version.
These settings apply to the Internet (ADSL) port of the modem.
The Ethernet MAC address being used by the Internet (ADSL) port of
the modem.
The IP address that is used by the Internet (ADSL) port of the
modem. If no address is shown, the modem cannot connect to the
Internet.
Indicates either Client (in which case the IP address is obtained
dynamically from the ISP) or None.
The IP Subnet Mask being used by the Internet (ADSL) port of the
modem.
The gateway that is associated with the Internet IP address.
The primary DNS server IP address that is used by the modem. This
address is usually obtained dynamically from the ISP.
The secondary DNS server IP address that is used by the modem.
This address is usually obtained dynamically from the ISP.
These settings apply to the Ethernet port of the modem.
The Ethernet MAC address that is used by the Local (LAN) port of the
modem.
The IP address that is used by the Local (LAN) port of the modem.
The default is 192.168.0.1.
If OFF, the modem will not assign IP addresses to PCs on the LAN.
If ON, the modem will assign IP addresses to PCs on the LAN.
The IP subnet mask that is used by the Local (LAN) port of the
modem. The default is 255.255.255.0.
v1.0, October 2014
Managing Your Modem