Optional Accessories; Maintenance - Makita DVC860L Instruction Manual

Installing the tool box
Fig.15
1. Release the lock of the battery cover, and open
the battery cover.
2. Set the rails on the tool box along the grooves on
the housing.
3. Close the battery cover and apply the lock.
Fig.16
The tool box is convenient for carrying batteries,
extension code, pipe, or cuffs.
Connecting the hose
CAUTION:
Never force the hose for bending or stamp it.
•
Never move the cleaner by a hose. Forcing,
stamping and pulling the hose may cause a
breakage or deformation of the hose.
When picking up large wastes such as planer carvings,
•
concrete dusts or similar other than small wastes, use
the 38 mm inner diameter hose (optional accessory).
Using the 28 mm inner diameter hose (optional
accessory) may cause a hose stuffing and damage.
Fig.17
Insert the hose onto the mounting port of the tank and
turn it clockwise until it locks.

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off, unplugged,
•
and the battery cartridge is removed before attempting
to perform inspection or maintenance.
Storage of power supply cord
Fig.18
You can wind up the power supply cord around the tool box.
Storage of accessories
Fig.19
Fig.20
The pipes can be placed into the pipe holder when not
using the cleaner for a short time.
Fig.21
The hose can be stored around the tool by connecting
each ends.
Cleaning
CAUTION:
Never use gasoline, benzine, thinner, alcohol or the
•
like. Discoloration, deformation or cracks may result.
Cleaning of cloth filter (for the cloth filter model)
Fig.22
Clogged cloth filter causes poor suction performance.
Clean out the cloth filter from time to time.
To remove dust or particles adhering to the cloth filter,
shake the frame bottom quickly several times.
Cleaning of powder filter and prefilter
(for the powder filter model)
Clogged powder filter, prefilter and damper cause poor
suction performance.
Clean out the filters and dampers from time to time.
To remove dust or particles adhering to the filters, shake
the frame bottom quickly several times.
Fig.23
Occasionally wash the powder filter in water, rinse and
dry thoroughly in the shade before use. Never wash
filters in a washing machine.
NOTE:
Do not rub and scratch the powder filter, the
•
prefilter or the damper with hard objects such as a
brush and a paddle.
The filters wear out in course of time. It is
•
recommended to have some spares for them.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
These accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Makita genuine battery and charger
•
Hose
•
Front cuffs (22, 24, 38)
•
Straight pipe
•
Corner nozzle
•
Round brush
•
Powder filter (for dry dust)
•
Damper
•
Prefilter
•
Nozzle assembly
•
Bent pipe
•
Polyethylene bag
•
Water Filter (option for the cloth filter model)
•
Paper pack
•
Holder set
•
NOTE:
Some items in the list may be included in the tool
•
package as standard accessories. They may differ
from country to country.
12
or attachments
Only use accessory or
are