Enabling Logging - Cisco ASA 5505 Configuration Manual

Guidelines and Limitations
Guidelines and Limitations
Context Mode Guidelines
Supported in single and multiple context modes.
Firewall Mode Guidelines
Supported in routed and transparent firewall modes.
IPv6 Guidelines
Supports IPv6.
Configuring Logging
This section describes how to configure logging, and includes the following topics:
•
•
The minimum configuration depends on what you want to do and what your requirements are for
Note
handling syslog messages in the adaptive security appliance.

Enabling Logging

To enable logging, perform the following steps:
Path
Choose one of the following:
Home > Latest ASDM Syslog Messages > Enable
•
Logging
Configuration > Device Management > Logging >
•
Logging Setup
Monitoring > Real-Time Log Viewer > Enable
•
Logging
Monitoring > Log Buffer > Enable Logging
•
Cisco ASA 5500 Series Configuration Guide using ASDM
71-6
Enabling Logging, page 71-6
Configuring an Output Destination, page 71-7
Purpose
Enables logging.
Chapter 71 Configuring Logging
OL-20339-01