Snmp Monitoring - Cisco ASA 5505 Configuration Manual

Chapter 73 Configuring SNMP
•
SNMP Syslog Messaging
SNMP generates detailed syslog messages numbered 212nnn. Syslog messages indicate the status of
SNMP requests, SNMP traps, SNMP channels, and SNMP responses from the adaptive security
appliance to a specified host on a specified interface.
For detailed information about syslog messages, see Cisco ASA 5500 Series System Log Messages.

SNMP Monitoring

To monitor SNMP, perform the following steps:
Path
Tools > Command Line Interface
Type show running-config snmp-server,
then click Send.
Tools > Command Line Interface
Type show running-config snmp-server
group, then click Send.
Tools > Command Line Interface
Type show running-config snmp-server
host, then click Send.
Tools > Command Line Interface
Type show running-config snmp-server
user, then click Send.
Tools > Command Line Interface
Type show snmp-server engineid, then
click Send.
Tools > Command Line Interface
Type show snmp-server group, then click
Send.
Tools > Command Line Interface
Type show snmp-server statistics, then
click Send.
Tools > Command Line Interface
Type show snmp-server user, then click
Send.
OL-20339-01
SNMP Monitoring, page 73-11
Purpose
Displays all SNMP server configuration information.
Displays SNMP group configuration settings.
Displays configuration settings used by SNMP to control messages and
notifications sent to remote hosts.
Displays SNMP user-based configuration settings.
Displays the ID of the SNMP engine configured.
Displays the names of configured SNMP groups.
Note
Displays the configured characteristics of the SNMP server.
Displays the configured characteristics of users.
If the community string has already been configured, two extra groups
appear by default in the output. This behavior is normal.
Cisco ASA 5500 Series Configuration Guide using ASDM
Monitoring SNMP
73-11