Assurance Activity Configuration; Logging Into The Appliance; Log In Or Out Of The Firepower Chassis Manager - Cisco Firepower 4110 Preparative Procedures & Operational User Manual

Cisco Preparative Procedures & Operational User Guide

4 Assurance Activity Configuration

This section has the required guidance and settings as specified in the NDcPP.

4.1 Logging into the Appliance

4.1.1 Log In or Out of the Firepower Chassis Manager

1) To log in to the Firepower Chassis Manager:
a. Using a supported browser, enter the following URL in the address bar:
https://<chassis_mgmt_ip_address>
where <chassis_mgmt_ip_address> is the IP address or host name of the FXOS chassis
that you entered during initial configuration.
Supported Web Browser
Mozilla Firefox – Version 42 and later
Google Chrome – Version 47 and later
b. Enter your username and password.
NOTE! Observe the password is not displayed.
c. Click Login
The Overview page appears if the authentication was successful.
If authentication fails, access will be denied.
Audit Record:
Creation Time: 2015-07-09T08:20:17.030
User: internal
Session ID: internal
ID: 3330860
Action: Creation
Description: Fabric A: local user admin logged in from 172.23.33.113
Affected Object: sys/user-ext/sh-login-admin-pts_5_1_15135
Trigger: Session
Modified Properties: id:pts_5_1_15135, name:admin, policyOwner:local
© 2016 Cisco Systems, Inc. All rights reserved.