Grizzly G0733 Owner's Manual page 26

Installing/Removing
Tailstock Center
Installing the Tailstock Center
1.
Figure 24.
2.
3.
4.
Figure 24
Figure 24
5.
Figure 25.
6.
Removing the Headstock Center
1.
2.
3.
The tailstock quill must always be locked in
place during lathe operation. Before tighten-
ing the quill lock handle, it must be properly
aligned with the quill keyway. Otherwise,
the workpiece can be thrown from the lathe
causing serious personal injury or death.
Figure 25