Troubleshooting - Breville juice fountain compact Instruction Booklet

TROUBLESHOOTING

TROUBLESHOOTING
POSSIBLE PROBLEM EASY SOLUTION
Machine will not work The safety locking arm may not be correctly engaged in the
vertical operating position with the locking arm located into
when turned ON
the two grooves on either side of the juicer cover.
Motor appears to stall Wet pulp can build up under the cover if the juicing action is
too vigorous. Try slower juicing action by pushing the food
when juicing
pusher down slower. Clean the integrated pulp container, the
Nutri Disc™ and the juicer cover.
Excess pulp building Stop the juicing process. Remove the juicer cover, scrape off
pulp. Re-assemble and begin juicing again. Try alternating
up in the Nutri Disc™
(soft and hard) vegetable and fruit varieties.
Pulp too wet and Try a slower juicing action by pushing the food pusher down
reduced extracted slower. Remove Nutri Disc™ and thoroughly clean mesh walls
with the nylon brush. Rinse the Nutri Disc™ under hot water.
juice
If the fine mesh holes are blocked, soak the Nutri Disc™ in
a solution of hot water with 10% lemon juice to unblock the
holes or wash in the dishwasher. This will remove excess fiber
build up (from fruit or vegetables) which could be inhibiting
the juice flow.
Juice leaks between Try a slower juicing action by pushing the food pusher down
slower.
the rim of the juicer
and the cover of
the filter
Bowl container juice Try a slower juicing action by pushing the food pusher down
slower.
sprays out from spout
Juicer makes loud Nutri Disc™ is not properly locked into position. Turn the ON/
noise when turned on OFF button to OFF and unplug.
Disassemble the juicer (refer to disassembling).
Re-assemble (refer to assembly).
No juice coming out Check that the spout is not blocked with pulp.
while juicing
Refer to care and cleaning.
19