Remote Sensor; Description; Safety Information - Honeywell IAQPoint2 User Manual

Description

The E Point Remote Sensor provides continuous monitoring for one of
3
the following gases in ambient air: CO, H
hazards. Connected to an E
protection (second location, different gas type).

Safety Information

Users of the E
3
installation, operating and maintenance instructions, otherwise protection
provided by the monitor may be impaired. Read the following warnings
before using the monitor.
WARNING:
• Install according to local electrical regulations and codes.
• Installation should be performed by qualified personnel.
• Do not paint over the sensor screen.
• Ensure the sensor screen is free of dirt and debris.
• Ensure the sensor screen is not covered.
!
• Do not expose the monitor to electrical shock or continuous mechanical
shock.
• Do not expose the sensor to high pressure water spray.
• Do not use the monitor if it is damaged. Inspect the monitor before
use. Look for cracks, missing metals, or plastics. If the monitor is
damaged, contact Honeywell Analytics immediately.
• The warranty will be voided if the customer or any unauthorized service
personnel attempts to repair the unit.
E Point Standalone Gas Monitor User Manual
3

Remote Sensor

Point Standalone monitor, it provides dual
3
Point Remote Sensor should fully understand the
S, O , NO , and combustible
2 2 2
Remote Sensor
27