Sending Configuration; Configuration Summary - GE Reason RT430 Technical Manual

%4
%5
%x
%%
'_' is the character 'blank (ASCII 32).
Checksum type 1 consists of two hexadecimal digits, which represent the result of a XOR from all characters
comprised between `\$' and `*' (`\$' e `*' not included). It is useful for NMEA datagrams.
One example of serial datagram is presented below:
``Day:%d;Month:%m;Year:%Y;Hour:%H;Minute:%M;Second:%S;;%3''
4.4.4

Sending configuration

The <A > button allows transmitting the changes made to the unit.
PPLY
By clicking <A > a window will open requiring configuration username and password. Enter username
PPLY
and password and click <L
go momentarily out of operation. Once the transmission is concluded, a message appears on the screen
informing the outputs synchronism signal change.
the message after transmission.
Figure 31: Username and password window, and message after transmitting new time
In case the new configuration is not transmitted to the unit, the changes will not be saved and will be
discarded once the Web Interface is closed.
4.4.5

Configuration Summary

RT430-TM-EN-5
<LF>
<CR>
'%'
>. To cancel de action, click <C
OGIN
parameters to the unit.
Line feed (ASCII 10)
Carriage returns (ASCII 13)
checksum type 1
Caractere '%' (ASCII 37)
>. During the transmission, the unit will
ANCEL
Figure 31 shows the username and password window and
RT430
59