008932
3.
There is no distinction between the upper and
lower sides of the dust pack. You may insert its
protrusion of any side into the lower groove of the
dust stopper.
008933
4.
Overlap the frame of dust stopper with that of the
dust pack.
1
008929
5.
Place the dust stopper and the dust pack together
into the cleaner cavity in the same direction of
arrow on the dust stopper. Insert them all the way
into the slots in the cleaner cavity.
008927
6.
Place the entire container part of the dust pack
inside the tool itself.
1. Lower groove
1
1. Cleaner cavity
NOTE:
The paper pack is a throw-away type. When it has
•
become full, throw away the entire paper pack
without emptying.
2
3
008923
7.
Hook the front cover onto the front lip of the
cleaner. Then close the front cover.
CAUTION:
Forgetting to install the dust bag or the dust pack,
•
failure to insert the dust stopper together with the
dust bag or the dust pack all the way into the slots
or using a broken or ripped bag, may allow dust to
get into the motor. This may result in motor failure.
Do not fold the cardboard at its opening when
•
installing the paper pack, .
Never throw away the dust stopper because it
•
need to be used repeatedly whenever either the
dust bag or the dust pack is used.
OPERATION
Cleaning (Suction)
Nozzle
Attach the nozzle to clean off tables, desks, furniture, etc.
Nozzle slips on easily.
1
008913
7
1. Hook of front
1
cover
2. Front lip
3. Hook
2
1
1. Nozzle