Maintenance - Makita 4076D Instruction Manual

Nozzle + Extension wand (Straight pipe)
The extension wand fits in between the nozzle and the
cleaner itself. This arrangement is convenient for
cleaning a floor while standing erect.
1
2
3
008914
Corner nozzle
Fit on the corner nozzle for cleaning corners and
crevices of a car or furniture.
2
008915
Corner nozzle +Extension wand (Straight pipe)
In tight quarters where the cleaner itself cannot squeeze
in, or in high places hard to reach, use this arrangement.
1
2
008916

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off before
•
attempting to perform inspection or maintenance.
1. Cleaner
2. Nozzle
3. Extension wand
1. Cleaner
2. Corner nozzle
1
1. Cleaner
2. Corner nozzle
3. Extension wand
3
After use
008922
When charging or storing the cleaner, hang it from a nail
using the convenient hanger in back by raising it.
Cleaning
008908
From time to time wipe off the outside (cleaner body) of
the cleaner using a cloth dampened in soapy water.
Clean out also the suction opening, dust bag/dust pack
mounting area and the dust stopper.
CAUTION:
Never use gasoline, benzine, thinner, alcohol or
•
the like. Discoloration, deformation or cracks may
result.
008934
Wash the dust bag in soapy water when it is clogged
with dust and the cleaner power becomes small. Dry it
out thoroughly before use. An insufficiently dried bag
may cause poor suction and shorten the service life of
the motor.
8