Makita DHP480 Technical Information page 8

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Rotor, Gear assembly (cont.)
ASSEMBLING
(4) Assemble Gear assembly and Rotor section to Housing L as drawn in Fig. 13.
Fig. 13
1. Make sure that the ribs of Housing L are
fitted tightly in the notches of Stator.
2. Before assembling Switch to Housing L,
fit the prong of F/R change lever to
the projection of Switch.
F/R Change lever
Rib
Notch of Stator
Notch of Stator
Rib
prong portion
projection
Stator Gear assembly
P 8/ 12
F/R change lever