Makita BVF104 Instruction Manual page 10

Malfunction status
A strange sound is emitted when switch is turned ON
When sprayer is left after being switched OFF, a large
amount of liquid flows out of the nozzle
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.
ACCESSORIES
CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Various nozzles
• Various type of Makita genuine batteries and chargers
For European countries only
Noise
The typical A-weighted noise level determined according
to EN3744:
Sound pressure level (L
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 80 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN5349:
Work mode: spraying liquid
Vibration emission (a
Uncertainty (K): 1.5 m/s
10
ENG103-2
): 70 dB (A) or less
pA
ENG234-1
2
): 2.5 m/s or less
h
Cause
Coupling that drives pump is
broken
Blocked nozzle
Lever cock is set to continuous
spray
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine: Cordless Garden Sprayer
Model No./ Type: BVF104, BVF154
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
standards or standardised documents:
EN809, EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd,
Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
3-11-8, Sumiyoshi-cho,
Action
Request an overhaul
Clean or replace
Set lever cock to STOP
12th February, 2009
Tomoyasu Kato
Director
Makita Corporation
Anjo, Aichi, JAPAN
ENH003-10