Makita 4101RH Instruction Manual page 10

Part name
Pressure regulator
Description
Adaptor
Vinyl tube
Water pipe
Preset at about 15 psi.
314" female hose thread (inlet)
x
314" male hose thread (outlet)
Flow capacity: Maximum
390
GPH. minimum 10 GPH
Inlet pressures: Maximum 100 psi, minimum 25 psi
For connecting 1/4" vinyl tube to
a
faucet.
314" swivel
x
114' ' adaptor
1/4" in outer diameter x 1 111 6" in inner diameter x 18' in length
For adjusting the amount of water flow
Assemble the above parts hand tight as follows.
*Cut the vinyl tube at an angle for easier
insertion, Push the end of the vinyl tube
into the end
of
the adaptor using a combi-
nation pushing and twisting motion.
Screw the pressure regulator tight on the
adaptor.
Connect the vinyl tube firmly
to
the water
pipe.
Pressure regulator assembly
I
Tighten
, "
Adaotor
//
Vinvl tube
Water pipe
I
10