Makita 8413D Instruction Manual
Hide thumbs
Also See for 8413D:
- Instruction manual (64 pages) ,
- Technical information (8 pages) ,
- Instruction manual (19 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita 8413D
Summary of Contents for Makita 8413D
- Page 1 Cordless Percussion- Driver Drill Equipped with Electric Brake MODEL 8413D MODEL 8433D MODEL 8443D 002394 I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using.
-
Page 2: Specifications
SPECIFICATIONS Model 8413D 8433D 8443D Concrete 13 mm (1/2”) 14 mm (9/16”) 16 mm (5/8”) Steel 13 mm (1/2”) 13 mm (1/2”) 13 mm (1/2”) Wood 30 mm (1-3/16”) 36 mm (1-7/16”) 38 mm (1-1/2”) Capacities 6 mm x 75 mm... -
Page 3: General Safety Rules
GENERAL SAFETY RULES USA003-1 (FOR All BATTERY OPERATED TOOLS) WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS Work Area under the influence of drugs, alcohol, or medication. -
Page 4: Specific Safety Rules
Tool Use and Care Shorting the battery terminals together may cause sparks, burns, or a fire. 12. Use clamps or other practical way to 18. Maintain tools with care. Keep cutting secure and support the workpiece to a tools sharp and clean. Properly maintained stable platform. - Page 5 3. Always be sure you have a firm footing. Be 7. Do not touch the bit or the workpiece immediately after operation; they may be sure no one is below when using the tool in extremely hot and could burn your skin. high locations.
-
Page 6: Tips For Maintaining Maximum Battery Life
cal attention right away. It may result in (3) Do not expose battery cartridge to loss of your eyesight. water or rain. 5. Always cover the battery terminals with A battery short can cause a large current the battery cover when the battery car- flow, overheating, possible burns and tridge is not used. -
Page 7: Functional Description
Release the switch trigger to stop. Electric brake This tool is equipped with an electric brake. If the tool consis- tently fails to quickly stop after switch trigger release, have tool serviced at a Makita service center. -
Page 8: Speed Change
Reversing switch action 002409 This tool has a reversing switch to change the direction of rotation. Depress the reversing switch lever from the A side for clockwise rotation or from the B side for counterclockwise rotation. When the reversing switch lever is in the neutral position, the switch trigger cannot be pulled. - Page 9 CAUTION: • Always set the ring correctly to your desired mode mark. If you operate the tool with the ring positioned halfway between the mode marks, the tool may be damaged. Adjusting the fastening torque 002426 The fastening torque can be adjusted in 16 steps by turning the adjusting ring so that its graduations are aligned with the arrow on the tool body.
-
Page 10: Operation
When not using the driver bit, keep it in the bit holders. Bits 002432 45 mm (1-3/4”) long can be kept there. 1. Bit 2. Bit holder Adjustable depth rod 002437 The adjustable depth rod is used to drill holes of uniform depth. -
Page 11: Screwdriving Operation
eral times, the hole will be cleaned out and normal drilling may be resumed. Blow-out bulb (optional accessory) 002449 After drilling the hole, use the blow-out bulb to clean the dust out of the hole. 1. Blow-out bulb Screwdriving operation 002450 First, turn the action mode changing ring so that the arrow on the tool body points to the... -
Page 12: Drilling Operation
Drilling operation CAUTION: • Pressing excessively on the tool will not speed up the drilling. In fact, this excessive pressure will only serve to damage the tip of your bit, decrease the tool performance and shorten the service life of the tool. •... -
Page 13: Maintenance
Makita Authorized or Factory Service Centers, always using Makita replacement parts. EN0001-1 Recycling the Battery The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. To recycle the battery: 1. Remove the battery from the tool. - Page 14 CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
- Page 15 Memo...
- Page 16 Memo...
- Page 17 Stamp Timbre Makita Canada Inc. 1950 Forbes Street, Whitby, Ontario L1N 7B7 Fold...
- Page 18 Your answers to the following questions are appreciated. 1. This product was purchased from? 3. How did you first learn of Makita Power Tools? Hardware/lumber Store Industrial Supply Magazine/Newspaper Catalog Tool Distributor Other ( From dealer Other ( Store display 2.
- Page 19 When you need service... DATE • Explain the problem in a letter PURCHASED: • Enclose the letter with the tool DEALER’S NAME • Package carefully and send prepaid & ADDRESS: to the nearest Makita factory or authorized service centre MODEL NO.: SERIAL NO.:...
-
Page 20: Warranty Policy
WARRANTY. “The Makita Warranty is the only and the entire written warranty given by Makita for the Makita tools. No dealer or his agent or employee is authorized to extend or enlarge upon this warranty by any verbal or written statement or advertisement.”...