INSTALLATION
INSTRUCTIONS
PARTS LIST
Key
Accessory User's Information Manual
TOOLS REQUIRED
HDS (Honda Diagnostic System)
Key Cutter (ILCMK1COMP)
INSTALLATION
Customer Information: The information in this
installation instruction is intended for use only by skilled
technicians who have the proper tools, equipment, and
training to correctly and safely add equipment to your
vehicle. These procedures should not be attempted by
"do-it-yourselfers."
1.
Using the key cutter, cut this key to match the
original ignition key.
2.
Using the HDS, program this key to the vehicle.
Verify that the key works properly.
3.
Check the operation of the keyless entry using the
accessory user's information manual supplied.
4.
Give the key to your customer.
© 2008 American Honda Motor Co., Inc. – All Rights Reserved.
Accessory
KEYLESS ENTRY
P/N 08E60-TK6-100
NEW KEY REGISTRATION
1.
2.
3.
4.
AII 39868 (0808)
Application
2009 FIT
(BASE MODEL)
Acquire the PCM code from ISIS.
Connect the HDS tester to the OBD II data link
connector, then turn the ignition switch on.
Start the HDS, and click the car icon.
Input the VIN and other requirements in accordance
with the HDS, then click the check button.
Input the VIN and
other requirements.
Publications No.
AII 39868
Issue Date
AUG 2008
Click the car icon.
Click.
1 of 8
08E60-TK6-1000-91