Euro Migration Function; Should Be Executed - Sharp UP-X300 Instruction Manual

10

EURO Migration Function

Basically your POS terminal can be automatically modified to correspond to the introduction of EURO
by selecting the corresponding EURO status. However, there are several options you must set
depending on your need. So, please carefully conduct necessary settings.
EURO status:
You can select status from following 4 types ((A), (B), (C), or (D)). And the selectable type is decided as
follows for each status. Type (A) is the base status (initial status).
• From type (A):
• From type (B):
• From type (C):
Items
General Z1 report
General Z2 report
GT1/GT2/GT3 memory
Exchange1 amount printing for
total and change
Exchange1 amount printing for
total validation print
Exchange1 calculation method
Domestic currency symbol
Domestic TAB
Conversion of preset prices of
Dept./PLU/EAN*
Exchange1 currency descriptor
Exchange1 TAB
The marked items "-" is remaining the current data.
*: The preset rate of the [EX 1] key is applied as the conversion rate, and the calculation method is set
to "division". When the conversion has been made, the message "PRICE CONVERTED" is printed on
the report.
■ Setting the date and time when the automatic EURO modification
operation should be executed
To certainly execute the automatic modification operation, you can program the scheduled date and
time to execute the automatic EURO modification operation. From ten days before the preset date, the
remaining days are printed at the bottom of the daily full resetting report.
Date and time setting will be reset after the execution of automatic modification operation, and again
you can program the date and time for the next automatic modification operation. Also you can make
the automatic EURO modification operation compulsory. When the above-mentioned preset date and
time has come, and also when you start an entry in the REG/MGR mode, the error message "EURO
CHANGE ENTRY COMPULSORY" will be displayed. You cannot start any operation in REG mode until
you make the operation.
280
Selectable Type (B), (C), or (D)
Selectable Type (C), (D)
Selectable Type (D)
Type (B)
ISSUE
ISSUE
-
YES
YES
DIVISION
-
-
-
[EURO]
2
Type (C)
ISSUE
ISSUE
CLEAR
YES
YES
MULTI
[EURO]
2
YES
The current domestic symbol
The current domestic TAB
Type (D)
ISSUE
ISSUE
CLEAR
NO
NO
MULTI
[EURO]
2
YES
-
-