End Of Day Reports Period 1; End Of Day Reports Period 2 - Sharp UP-X300 Instruction Manual

■ End of Day Reports Period 1

Selecting End of Day Reports Period 1 from Reports Formats allows you to setup periodic 1 report
format issued at the end of day operation.
The procedure for setting is as the same as the procedure explained in the previous section. Please
refer to the previous page.

■ End of Day Reports Period 2

Selecting End of Day Reports Period 2 from Reports Formats allows you to setup periodic 2 report
format issued at the end of day operation.
The procedure for setting is as the same as the procedure explained in the previous section. Please
refer to the previous page.
185