Programming For Devices - Sharp UP-X300 Instruction Manual

■ Programming for devices

When you press the button at the "Programming", the card type editor will appear.
Programming for logical device
Device
Printer
(including Bill Printer, KP)
Bill printer
Kitchen Printer
(first, second, third KP are
same logical device)
EFT (Datatran)
EFT (G&D ZVT700)
KVM
Drink Dispenser
(WMF)
252
Parameters
Layout (Programmed at Layout Editor)
Printer type (Roll Printer / Sheet Printer)
Kitchen printer type
(Addition / Single/Double / Addition + Single/ Double Addition
/ Double ADD + SNGL)
Sorted receipt with cut (YES / NO)
Authorization rate to allow CH TIP (0.00% - 100.00%)
Printing Gift Card No. at Gift Purchase Activate and Reload
(YES / NO)
Print (YES / NO)
Sending of print data (Enable / Disable)
Mode (Debit mode / Credit mode / Credit and Debit mode)
Check the Credit and Void (YES / NO)
Credit function (Multi / Single)
Check sum (Enable / Disable)
Drink Dispenser # (1 to 8)
(It is necessary to set the drink dispenser number to 0 (zero) for
those machines which no drink dispenser is being connected.)
Maximum numbers of times of auto retry (000 to 300)
(Indication of "000" is regarded as infinite.)
Interval for auto retry (0 to 99 sec)