Disassembling The Carriage - Brother Model KH--830 Service Manual

DISASSEMBLING THE CARRIAGE
1 - - - - - - - - - - - - - - - - - ---- --··- - -
I . Removing the carriage handle
1.1 Keep the handle down and remove the two right and
left
handle screws. Then the handle can be taken off the carriage.
2. Removing the carriage cover
2, I Loosen, from the back of the carriage, and remove the two
right and left carriage cover clamp screws.
2.2.
Pun
off the carriage cover upward. Then the H.C.L knob, the
- 7-
Fig. 1
Name of parts
<D
Handle
®
Carriage cover
' ®·1 H.C.L knob
®·2
Plain
lever knob
® ·3 Change knob
®
Stitch dial cap
plain lever knob and the change knob will come off.
2.3 Pull off
upward
the
H.C.L knob spring mounted
under
the
H.C.L.
knob.
3. Removing the stitch dial
3.1 Pull off the stitch dial cap upward.
3.2 Remove the fastening screw and pull offthestitchdialupwud.