Separation Cam; Main Cam; Lace Selecting Lever - Brother Model KH--830 Service Manual

A
8
D
E
needle stitch (wruch intersects with the feed hook) to move the
next plain needle.
4 .
tobin cam
The main cam moves and selects the plain needle when it changes
stitches.
5.
Se~tion cam
As
in the case of the separation cam on the
K
canlage, the separa-
tion cam guides the knitting needle, wruch is held down by the
main cam, to B or D position.
Needles in
B
position .... When the needles carried by the
feed
hooks
from
D position intersect with
each other, the stitch Is moved up just
before the combs by the main cam.
The feed hook h olds this stitch, and sepa·
rate the needles into
B
and
D
position.
Needles In
D
position .... While staying in
0
po&ltlon, the needle is
caused to
inte~t
with tbc needle in B
position by the feed hook, and thon the
needle is raised by the main cam IUitil the
needle btch panes
the stitch. After the
needles intersect with
p~te
cam
C, they
are separated into
B
and
D
positions by
the main cam and separation cam.
6. Lacetelect:ina lev«
-S-
The lace selecting lever has two positions
" N"
and
"F",
and it
funclioll$
as
follows:
6.1 The position of N is normal bee position.
6.2 The polition ofF is used for knitting the flne lace.