Disassembling The Bed - Brother Model KH--830 Service Manual

DISASSEMBL ING THE BED
®Puts box
®-I
l
(j)- -
-----tl1!!l
~R'
(j)-
I
<!:-
2
Panel
'
~- ·
' '
Fig. 13
Name of parts
(!).J
Card stop lever knob
CD -2 Needle selector panel
clamp screw
(D-4 Direction Indicator
®-I
Parts box clamp screw
® -I
Case reinforcing plate
clamp screw
@--2 Needle bed clamp
screw
A
@-3
Needle bed clamp
screw B
(_3)-4 Fastening screw
I . Removing the needle selector panel 3. Taking out the needle bed
1.1 l.lft and pull off the card stop lever knob.
1.2 Remove the three needle selector panel clamp screw.
13
Slide the panel to the right,
lift
and talce
It
off.
1.4 l.lft and pull off the direction indicator (plastics).
2: Removing the putt box
2.1 Remove the lld of the parts-box and take out the accessories.
Remove one parts box clamp screw.
· 2.2 Slide the part.-box to the.rigbt; lift and take it ofl
-21-
3 .I Remove the two case reinforcing plate A clamp SCTews and one
case reinforcing plate B clamp screw.
3.2 Remove the four right and left needle bed clamp screws (A).
3.3 Remove the two needle bed clamp screws (B) and the right
and left parts of the leaf spring.
3.4 Remove the four right and left fastening screws working from
the back of the bed and the right and left parts of the mount
will become free.
3.5 Take the bed out of its case.