Mounting Dimensions Of Each Part Of Ribbing Attachment - Brother Model KH--830 Service Manual

Mounting demensions of each part of KR-830
- ----- ··- - - - - - - - - - - - l
•connecting ann
•Set
the
connecting arm to the
KH-~aniage
and check.
· Mounting demension of yam feeder·-·········123.6 m/ m
Demension between the latch presser plate and the rear foot of KH
carriage.
·4
(For KR-810·········-124.2 m/m)
· Mounting demension of magnet
box·········l4l.S
m/m
Demension between the magnet box and the rear foot of
KH
carriage.
(Please check when the latch or hook of the needle hits the yarn
feeder or magJlet holder.)
'""'
IE----1%1.6'1.---
~-------141 .5
... - -
°KR carri.age
·Mounting demension of sub raising cam .......... J4.S
m{m
Demension between the sub raising
cam
and
the
rear foot of KR
carriage.
· Mounting demension of rub slitch
cam ..........
st.3
m/m
Demension between the sub ·stitch cam and the rear foot of KR
carriage.
(Please check when the KR carrlager-------+--
does not slide on the needle bed
smoothly.)
St.3'Mo
14.5"
•Needle gate pegs
- Mounting demension of needle gate pegs ..........
J20.4
m/m
(For KR-81Q .......... t Q3.S m/m)
Dt.menslon between lhe needle pte
pegs and the rur rail of the needle bed.
Fig. 54
- 53-