Makita BFR540 Technical Information page 6

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Casing Assembly and Feeder Box Assembly (cont.)
DISASSEMBLING
Fig. 11
11) Remove Box cover complete from Feeder box
by unscrewing Tapping screw 4x18.
Box cover complete
Tapping screw 4x18
Fig. 12
12) Remove Ratchet arm complete and
Compression spring 6 from Spur gear 16.
Spur gear 16
Fig. 14
14) Remove Dust cover from Feeder box.
Note: Because the bow portion of Dust cover
is easily damaged, be sure to remove carefully
together with Wheel as illustrated to right.
Dust cover
Feeder box
Compression spring 6
Ratchet arm complete
Wheel
Side view of Feeder box
after removing Box cover complete
Dust cover
Feeder box
Fig. 13
13) Remove Stopper, Pin 3 and Torsion spring 4
from Feeder box.
Insert a screwdriver through the hole of
Dust cover into Wheel, then lever up Dust cover
together with Wheel.
Compression spring 6
Ratchet arm complete
Stopper Torsion spring 4
Pin 3
Stopper
Pin 3
Torsion spring 4
Wheel
Dust cover
bow portion of Dust cover
P 6/16