R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Casing Assembly and Feeder Box Assembly (cont.)
DISASSEMBLING
Fig. 7
7) While pressing the locking claws of Casing cover inward
using 1R291, pull off Feeder box section from Casing cover.
Feeder box section
Fig. 8
8) Remove Plate from Stopper base as follows:
while pressing down two Levers at the same time,
push Stopper base towards Feeder box fully until
it stops.
Fig. 9
9) While pressing down two Levers
at the same time, separate Feeder box
from Stopper base.
Stopper base
1R291
locking claw
of Casing cover
Casing complete
Dial 42
Fig. 10
Feeder box
Dial 42
Countersunk head
Stopper base
10) Remove Lever and Compression Spring 2 (2 pcs each)
from Feeder box.
Dial 42 can now be removed from
Casing complete by unscrewing
Countersunk head screw M4x12.
Shifter pin
O Ring 12
Flat washer 6
screw M4x12
Lever
Feeder box
Plate
Lever
Compression spring 2
Feeder box
P 5/16
Plate