Samsung iDCS 500 Programming Manual page 395

iDCS 500
TECHNICAL MANUAL
• GK USE: This determines if a Gatekeeper is referenced on the network and
identified by the ITM card(s).
NOTE: Programming MUST be exited before changes to the ITM3 take effect.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ACTION
1. Press TRSF 832 Display shows the first
access code entry number and access
code.
2. Press UP or DOWN key to select an entry OR
Press RIGHT soft key to move cursor
3. Press RIGHT soft key to move cursor. Press
UP or DOWN key to select an option
OR
Press RIGHT soft key to move cursor
3. Using the keypad input an access code that
will reference an IP address table
4. Press RIGHT soft key to enter data and move
cursor. Press UP or DOWN key to
select an option entry
5. Press RIGHT soft key to move cursor. Using
the keypad enter the number of
digits in the access code. Press RIGHT soft
key to enter data and move cursor.
6. Press UP or DOWN key to select an entry
Press RIGHT soft key to move cursor.
7. Using the keypad enter the number of digits
of the access code to delete. Press
MMC: 832
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
PROGRAMMING
PART 2 JANUARY 2003
DISPLAY
[00] ACCESS CODE
0
[01] ACCESS CODE
0
[01] ACCESS CODE
1
[01] ACCESS CODE
1
[01] ACCESS CODE
80
[01] CODE LENGTH
80
[00] CODE LENGTH
2
[01] DEL LENGTH
1
[01] DEL LENGTH
2
HOME
PAGE
Table of
Contents
HELP