Samsung iDCS 500 Programming Manual page 315

iDCS 500
TECHNICAL MANUAL
MMC: 728
DESCRIPTION:
Allows the system administrator or technician to associate a CID or ANI number
received from the central office with a name programmed in this translation table. If
there is no match between a received number and a name in this table, "no CID
name" will be displayed.
The translation table consists of 500 entries for a iDCS 500-M system and 1500 for a
iDCS 500-L system. Each entry is comprised of a ten-digit (14 digits allowed)
telephone number and a 16-digit name.
Names are written using the keypad. Each press of a key will select a character.
Pressing the next key will move the cursor to the next position. For example, if the
directory name is "SAM SMITH," press the number "7" three times to get the letter
"S." Now press the number "2" once to get the letter "A." Continue selecting
characters from the table below to complete your message.
NOTE: When the character you want appears on the same dial pad key as the
previous character, press the VOL UP key to move the cursor to the right.
• DCS KEYSETS
COUNT
DIAL 0
DIAL 1
DIAL 2
DIAL 3
DIAL 4
DIAL 5
DIAL 6
DIAL 7
DIAL 8
DIAL 9
DIAL ✱ ✱ ✱ ✱
The # key can be used for the following special characters: #, space, &, !, :, ?, ., %,
$, -, <, >, /, =, [, ], @, ^, (, ), _, +, {, }, |, ;, \, " and ~.
CID / ANI TRANSLATION TABLE
1 2
Q Z
space ?
A B
D E
G H
J K
M N
P R
T U
W X
: =
PART 2 NOVEMBER 2001
3 4
. )
, !
C @
F #
I $
L %
O ^
S &
✱
V
Y (
✱
[ ]
PROGRAMMING
Table of
Contents
5
0
1
2
3
4
5
6
7
8
9
HOME
PAGE
HELP