Samsung iDCS 500 Programming Manual page 146

iDCS 500
TECHNICAL MANUAL
MMC: 412
DESCRIPTION:
Allows for the assignment of analog DID or E&M cards for proper signalling. This
MMC is only for analog types of DID/E&M trunks. These trunks can also use the
translation tables in MMC 714. The E&M trunks are allowed the use of translation
tables via MMC 416. The signalling condition types are as follows:
IMMEDIATE
DELAYED
WINK
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
ANS/RLS Used to select ALL
ACTION
1. Press TRSF 412
Display shows
2. Enter desired trunk number (e.g., 705)
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor
OR
Press ANS/RLS to select all trunks
3. Enter desired trunk type selection from
above list
OR
Press UP or DOWN key to make selection
and press RIGHT soft key
ASSIGN TRUNK SIGNAL
DISPLAY
[701] TRK SIGNAL
IMMEDIATE START
[705] TRK SIGNAL
IMMEDIATE START
[705] TRK SIGNAL
WINK
PROGRAMMING
PART 2 NOVEMBER 2001
HOME
PAGE
Table of
Contents
HELP