iDCS 500
TECHNICAL MANUAL
MMC: 510
DESCRIPTION:
Provides the ability to customize the ring cadence for single line ports on a system-
wide basis. There are 5 cadences available. Please call Technical Support before
changing any cadences as some peripheral systems may require default settings.
CADENCE NAME
1:STN RING
2:TRK RING
3:DOOR RING
4:ALM RING
5:CBK RING
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ACTION
1. Press TRSF 510
Display shows
2. Dial cadence number from above list (e.g., 3)
OR
Press UP or DOWN key to select , press
LEFT soft key and advance to step 3
3. Dial new value for interrupt times (must be
four digits)
DESCRIPTION
This is the cadence intercom calls will ring at.
This is the cadence trunk calls will ring at.
This is the cadence doorphone calls will ring at.
This is the cadence alarm reminder calls will ring at.
This is the cadence callbacks will ring at.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
PART 2 NOVEMBER 2001
SLI RING CADENCE
DISPLAY
1:STN RING :0400
0200 0400 3000
3:DOOR RING:0400
0100 0400 2000
3:DOOR RING:0100
9900 0100 9900
HOME
PAGE
PROGRAMMING
Table of
Contents
HELP